Warehouse & Small Factory Operations
Efficient material flow inside warehouses and small factories depends on having the right handling equipment at every stage — receiving, storage, picking, and shipping. ZHONGMAI manufactures a complete range of electric-powered warehouse equipment from hand pallet trucks to reach trucks, all designed for indoor use with zero emissions and low noise.
Electric Forklifts for General Warehouse Duty
ZHONGMAI's electric counterbalance forklifts in the 1.5–3.5 tonne capacity range handle the core warehouse tasks: unloading trucks, moving pallets to storage, and loading outbound shipments. Lithium-ion battery options provide opportunity charging — plug in during breaks and lunches — eliminating the need for battery swap rooms and reducing the fleet size needed to cover multi-shift operations.
Compared to internal combustion forklifts, electric models produce zero exhaust emissions, making them mandatory in food-grade warehouses, pharmaceutical storage, and enclosed manufacturing areas. Operating costs are significantly lower: electricity costs a fraction of LPG or diesel per operating hour, and the absence of an engine, transmission, and exhaust system reduces scheduled maintenance to tire replacement, brake adjustment, and periodic hydraulic service.
ZHONGMAI electric forklifts use AC drive motors with regenerative braking, which returns energy to the battery during deceleration and extends runtime per charge. Standard features include side shift, free-lift masts, and LED worklights.
Stackers for Medium-Density Storage
Not every warehouse justifies a counterbalance forklift. ZHONGMAI's stacker range — semi-electric, fully electric, and ride-on models — serves facilities with moderate throughput, narrow aisles, or limited budgets. Semi-electric stackers combine powered lift with manual drive, keeping cost low for operations that move fewer than 30 pallets per shift. Fully electric stackers add powered drive and are available with lift heights up to 5.5 m.
Ride-on electric stackers bridge the gap between walkie stackers and forklifts: the operator rides on a fold-down platform, increasing travel speed and reducing fatigue during long-distance moves across large warehouse floors. Initial straddle and counterbalance configurations suit different pallet and aisle-width combinations.
All ZHONGMAI stackers are designed for single-phase charging from standard wall outlets, so no special electrical infrastructure is needed — a meaningful advantage for small factories and rented warehouse spaces.
Reach Trucks & Pallet Trucks for High-Density & Receiving
High-bay warehouses with racking above 6 m require reach trucks that combine height with aisle-turning agility. ZHONGMAI reach trucks lift to 10.5 m with rated capacities of 1.4–2.0 tonnes, operating in aisle widths as narrow as 2.8 m. Proportional hydraulic controls provide the precision needed for safe load placement at height, and tilt-angle indicators help operators confirm load security before raising.
At the receiving dock and shipping staging area, hand pallet trucks remain the most cost-effective tool for short-distance pallet moves. ZHONGMAI's hand pallet trucks are available in standard 2.5 and 3.0 tonne capacities with fork lengths from 800 to 1,220 mm. Nylon or polyurethane wheels are selected based on floor surface — nylon for smooth concrete, polyurethane for rougher finishes.
For operations that need powered horizontal transport but not elevated stacking, electric pallet trucks (powered pallet jacks) offer walk-behind or ride-on configurations that move pallets at 5–6 km/h with minimal operator effort.
Frequently asked questions
How long does a lithium-ion forklift battery last per charge?
ZHONGMAI lithium-ion forklift batteries provide 6–8 hours of continuous operation under typical warehouse conditions. Opportunity charging during breaks can extend effective runtime to cover full double shifts without battery swaps.
What is the minimum aisle width for ZHONGMAI reach trucks?
ZHONGMAI reach trucks operate in aisles as narrow as 2.8 m (approximately 9.2 ft) for standard pallet widths. This allows warehouses to increase storage density by reducing aisle spacing compared to counterbalance forklift layouts.
Do electric stackers require three-phase power for charging?
No. ZHONGMAI electric and semi-electric stackers charge from standard single-phase outlets (220V or 110V depending on market). Built-in chargers are standard, so no external charging station is required.
What capacity hand pallet trucks do you offer?
Standard capacities are 2.5 and 3.0 tonnes, which cover the vast majority of palletized goods. Fork lengths range from 800 mm to 1,220 mm to fit standard and long pallets. Stainless steel and galvanized models are available for food and pharmaceutical environments.
Can I mix ZHONGMAI warehouse equipment with existing brands?
Yes. ZHONGMAI equipment uses standard Euro-pallet dimensions, common battery voltages, and industry-standard connector types. The machines integrate into any existing warehouse operation without workflow changes.
Products
Warehouse & Small Factory Operations
- Phone / WhatsApp: +86 182 5478 8200
- Email: [email protected]
- Jining, Shandong, China