Tracked Dumpers & Mini Dumpers (Crawler Carriers)

Mostly size and where you stand. Mini dumper usually means the walk-behind and small ride-on class — our ZM-500 through ZM-3T — while tracked dumper covers the whole crawler family up to the cab machines. The buying logic is identical: rated load, grade, bed size. If loads run past 3 t or hauls get long, move up to the seated and cab models.

Not as a standard product today. The line runs 6.5 hp gasoline on the ZM-500 and diesel from 1 t up, because field crews refuel in seconds and work full days off-grid. If your job is indoors or emissions-restricted, write to us anyway — we will tell you plainly whether an electric build fits your duty cycle or whether you should buy elsewhere.

Factory sheets rate the 8–10 t cab machines at 45°, the 2–3 t ride-ons at 35°, the ZM-1T at 50° and the ZM-500 at 20°. Those are sheet ratings; real capability depends on load, surface and operator. For a specific haul road, send us the grade and the material and we confirm against the actual build.

The ZM-500 is 844 mm wide and 1,735 mm long, so it clears a standard 900 mm gate or single door opening with room for your hands on the handles. Height is 1,255 mm, low enough for greenhouse and basement work. If your access is tighter than 844 mm, measure first — that dimension is fixed by the track gauge.

Both exist in the range. The ZM-500 takes a hydraulic self-loading shovel that scoops its own hopper full — it is in the photos above. On the steel-track carriers we mount a 3–5 t telescopic crane with hydraulic outriggers, so one machine hauls the pipe and then sets it. Tell us bed size and lift duty and we quote the combination.

Send three things: the material and tonnage you haul, the worst grade or ground on the route, and your destination port. We reply with a configured build sheet — model, bed, options, lead time — plus the full datasheet. Machines ship from Jining, Shandong, with inspection photos before the container closes.

An IHI crawler carrier is a Japanese-built machine sold through a dealer network with strong local after-sales support. Our ZM series covers the same tracked-carrier geometry — hydraulic dump, rubber tracks, compact footprint — at a lower factory-direct price, with the trade-off of a longer shipping lead time and no local dealer. If you have seen an IHI crawler carrier for sale and liked the spec but want to compare factory pricing, send us the IHI model number and we will tell you honestly whether our build matches, falls short or exceeds it on each point.

A mini crawler carrier is a compact tracked machine — walk-behind or small ride-on — used where a full-size carrier cannot fit: greenhouse rows, garden paths, tight construction corridors. Our ZM-500 (500 kg, 844 mm wide) and ZM-1T (1,000 kg) cover this class. If you need a flat deck rather than a hopper — sometimes called a crawler plate carrier — the ZM-1T flat-bed option works for sheet goods, sod rolls and panel transport.

Lite Industries crawler carrier products serve the North American landscaping and turf market with compact tracked machines and strong dealer coverage. Our direct-factory alternative sits at a lower ex-works price with similar payload and track geometry. The gap is lead time and local support: Lite Industries ships domestically with dealer backup; we ship from Shandong with a longer transit but a lower unit cost. For a buyer running a fleet or planning ahead on a project timeline, the factory-direct route often wins on total landed cost.